Level1Techs - 1.4 Display Port KVM Switch - Dual Monitor - Two Computer

Description

Only the KVM and power adapter are included.
Features
:
Full DisplayPort switching capabilities:
Two DP 1.4 connections from each computer (up to 4k/120hz or 8k/30hz).
Lower resolutions + Higher framerates possible e.g. 144hz @ 1440p work just fine because of full DP 1.4 compatibility. (Overclocking not supported)
DisplayStream Compression Supported
Intelligent EDID Engine for HDCP Rekeying (computers know when the port is inactive. Check out the Level1Techs repeater if you need monitor emulation).
HDCP Passthrough Supported (maintains HDCP signal integrity)
Intelligent USB HID passthrough (includes work-arounds for known problematic devices)
Rear Inputs:
2x 3.5mm Audio (recommended for beeps and boops -- may need a ground loop isolator)
4x DisplayPort 1.4
2x USB 3.0 (USB 3 5gbps, or USB 3.2 gen 1)
Rear Outputs:
2x Displayport 4 connection
3x USB 2.0 Ports
1x USB 3.0 (USB 3 5gbps, or USB 3.2 gen 1)
1x analog 3.5mm audio
Front:
Pushbutton for switching Inputs
1x USB 2.0 HID port
1x USB 3.0 (USB 3 5gbps, or USB 3.2 gen 1) ports (up to 1A current)
Keyboard commands supported:
Double-tap numlock to do a soft-reset on the USB hub (some USB peripherals do not like to be connected to a KVM!)
Double-tap scroll lock followed by 1-4 to switch between inputs without using the buttons on the front of the KVM.
Double-tap scroll lock and left control to toggle on and off left control as a hotkey.