IPAC2 controller with USB cable NEWEST VERSION US SHIPPER from Ultimarc,!!!!

Description

I-PAC2 NEWEST VERSION AVAILABLE VERSION WITH USB CABLE - "NEW" NOW SUPPORTS POWER CONTROL, MOUSE & VOLUME BUTTONS"
This listing is for 1 x New I-PAC2 NEWEST VERSION AVAILABLE Version with USB Cable.
I-PAC The world's most advanced PC interface for buttons and joysticks. Now supports power control, mouse and volume buttons.. NEW I-PAC 2 2014/2105 VERSION Full Speed USB 2.0. 32 Inputs. Upgradeable Firmware. I-PAC is the ONLY keyboard encoder to have up to 32 inputs each with it's own dedicated microprocessor pin.
No interaction or delays, vital for multi-button games such as fighting games. I-PAC is the ONLY keyboard encoder which emulates a USB keyboard and yet breaks through the USB simultaneously-pressed-switch limit of 6 switches (plus ctrl,alt,shift) which afflicts all USB keyboard devices.
This is beacuse it has inbuilt full native USB support, and does not rely on an add-on adaptor. I-PAC is the ONLY keyboard encoder which has a fully multi-processed interrupt-driven (so no loss of performance) pass-through connector so that an attached keyboard (or a second encoder) is handled in PS/2 mode with full byte interleaving rather than being switched on/off. I-PAC is the ONLY keyboard encoder which can be programmed either with or without host software. Even without special host software, the I-PAC can still display programming steps and current settings, so no working "blind".
I-PAC is the ONLY device to have a shift function which allows ANY input to be assigned to a shifted secondary keycode and the shift button can have it's own function too so no need for a dedicated extra control panel button.
I-PAC is the ONLY device to have a self-test LED which not only gives an instant visible check of your installation but also can indicate which connection (if any) is causing a problem.
I-PAC retains it's programming after power off.
Not all keyboard encoders do this! WinIPAC V2 Interactive Panel Designer Software Layout your panel, then program your I-PAC to match. The MAME control keys are by default assigned to the "A" and "B" inputs. INPUT PRESET CODES NORMAL CODES CODES WITH SHIFT (hold 1 player start) COIN 15 COIN 26 START 11 START 22ESC 1 RIGHTR arrowTab 1 LEFTL arrowEnter 1 UPU arrowTilde(adj volume, gamma, etc ) 1 DOWND arrowP (pause) 1 SW 1L-ctrl5 (Coin A) 1 SW 2L-alt 1 SW 3space 1 SW 4L-shift 1 SW 5Z 1 SW 6X 1 SW 7C 1 SW 8V 1AP 1BENTER START 11 START 22Esc 2 RIGHTG 2 LEFTD 2 UPR 2 DOWNF 2 SW 1A 2 SW 2S 2 SW 3Q 2 SW 4W 2 SW 5I 2 SW 6K 2 SW 8L 2 ATAB 2 BESC THE FOLLOWING CODES FOR THE I-PAC4 ONLY COIN 37 COIN 48 START 33 START 44 3 RIGHTL 3 LEFTJ 3 UPI 3 DOWNK 3 SW 1R-CTRL 3 SW 2R-SHIFT 3 SW 3ENTER 3 SW 4O 3 SW 5 3 SW 6 3 SW 7 3 SW 8 4 RIGHTU 4 LEFTV 4 UPY 4 DOWNN 4 SW 1B 4 SW 2E 4 SW 3H 4 SW 4M 4 SW 5 4 SW 6 4 SW 7 4 SW 8..............