Delkevic 4into1 Stainless Steel Headers - Honda CB900C - CB1000C - 1980-1983

Description

Delkevic 4into1 Stainless Steel Headers - Honda CB900C/1000C
New Delkevic 4into1 stainless steel headers for many of the Honda CB900C/1000C models. The weld quality is superb and they conveniently come with the exhaust gaskets! The stock exhaust collars and flanges are replaced with the parts included. The collars are welded to the down pipes, so there's no more fussing with the stock collars and flanges.
We also carry a complete exhaust system with a
megaphone
or
straight muffler
.
Exhaust System Features:
Down pipes are manufactured from 304 austenitic stainless steel which offers truly exceptional value for money and superior corrosion resistance to that of ferritic stainless steel ensuring your bike continues to provide miles of service and pleasure.
The primary section of the exhaust, which is mandrel formed to ensure uniform cross section and dimensions ensuring a guaranteed fit and performance, uses high quality 1.5mm section 304 stainless steel tube.
Headers are highly polished and designed to give a tight smooth line from the head with curved lines beneath the engine to give easy access to the oil drain plug and removal of the filter housing without removing the exhaust.
All exhaust products are made in a purpose-designed factory where stringent quality control procedures are implemented to maintain high standards.
Stock center stand can be used.
The outer diameter of the collector outlet is 67mm, ID 64mm
Delkevic offers a 12-Month Guarantee on all down pipes.
Kit Includes:
4 down pipes
Collector
Link Pipe
4 Springs
1 Spring Puller Tool
4 Exhaust Gaskets
Installation Notes:
Remove old exhaust gaskets and clean the exhaust ports.
Loosely fit new down pipes into the collector, match the numbers on the down pipes and the collector. Do NOT attach the springs.
Loosely fit the new down pipes to the cylinder head while supporting the collector. Do NOT tighten ANY of the fittings yet.
Attach all hardware, brackets and mounting clamps when applicable. Make sure there's adequate clearance for the center stand.
Attach springs, then tighten all hardware front to back.
Ride! Check all fasteners, springs and clamps periodically.
Installation of a new exhaust system system may change your motorcycle's fuel-to-air mixture requirements.
The spring puller tool included is fairly small. The process is easier with a longer tool, which we have available
here
.
Delkevic Part Number: HDR000K
Fits Honda:
CB900C Custom - 1980-1982
CB1000C Custom - 1983
4into1motorcycleparts
•
Store Policies