1 UP MORTAL KOMBAT 1 2 3 4 JOYSTICKS BUTTON KIT JAMMA ARCADE MAME MIDWAY HAPP

Description

Price changed effective 9-23-19
If you have any questions regarding any of the parts we sell call
E MAIL US
What you see in the picture is what you will get !
EVERYTHING IN MY AUCTIONS ARE 100% HAPP
YOU ARE BUYING A
BRAND NEW PAIR
OF
8 WAY
HAPP CONTROLS COMPETITION JOYSTICKS,
12 BUTTONS & 1 AND 2 PLAYER BUTTONS
&
SWITCHES
____________________________________
SHIPPING RATES:
USA SHIPPING:
USA SHIPPING:
PRIORITY 2 DAY-- FREE TO ANY 50 USA
__________________________________________________________________________
CHECKOUT
INFORMATION
LOOK FOR THIS WHEN USING E BAY CHECKOUT
CLICK
"message to seller"
,
BOX WILL DROP DOWN. ENTER YOUR COLOR CHOICES,
CLICK
"ADD"
YOU MUST CLICK THE SAVE BUTTON BEFORE CHANGING PAGES OR IT WILL NOT SAVE YOUR SELECTION!
All orders with no instruction for colors will be shipped as pictured!
____________________________________________________________________
_____
WHY BUY FROM US?
1. HOW MUCH IS YOUR TIME WORTH?
2. DO YOU WANT TO WAIT 2 WEEKS FOR YOUR PARTS TO SHIP BECAUSE THEY DONT STOCK THEM?
3. DOES IT COME WITH FREE DELIVERY CONFIRMATION AND AN E MAIL TO LET YOU KNOW THE NUMBER??
AT TORNADOTERRYS YOUR PARTS ARE SHIPPED
SAME DAY 99%
OF THE TIME.
MY 100% FEEDBACK PROVES IT--CHECK IT AND SEE!
THANK YOU IN ADVANCE!
Don't be fooled by other auctions
Thanks, Terry!
To add color selections:
On the checkout page BEFORE you hit pay, there is a
"Message to seller"
button
,
click that, type in the colors you need,
be specific
and then click
ADD
and it will save it, then hit pay.
Thanks Terry
ARCADE 1 UP
Arcade 1UP fans!
I had been told by numerous buyers that they are using this stick to retrofit the 1UP arcade games because the joystick that comes with it, well, it sucks to put it mildly,
I just finished retrofitting this stick into my arcade 1 up pac cab for myself and fitment is fine but you will need new 3/4 inch screws and 2 small flat washers per screw and it will fit nicely.
Slight
clearancing
of the joystick to button is nessacary for this kit.
The factory screws are too short and the hole pattern is not the same for the sticks but when you are done its perfect!
After securing the new joystick bases in place, you will be using the "COM" terminal and the "NO" terminal to make the connections for the new sticks and switches,
do not use the "NC" terminal.
You will also need .187 push on connectors, a pair of crimpers and a pair of strippers,
(No not that kind LOL !)
,  DO NOT SOLDER the terminals, you will ruin the spring inside the switches!
Making note of the wire colors (take a picture) and their position on the control panel, cut the wires from the existing stick at the stick, there are 2 wires of same color to each position, strip the ends of the wires and crimp a .187 terminal on to each of the wires you just cut. Repeat for all the others , I suggest you only do 2 wires at a time.
They will plug on to the same area of the new stick/switches as they were on the old switches and it does not matter which wire goes where as long as the same colors of wires go to the NO and COM terminals, one on each.
Enjoy!
This is not a direct bolt it, modifications must be made.